EcoFlow DELTA 3 Plus: US Specifications and Backup Checks

US product research · Source checked September 12, 2026

This is a specification-based research profile of the EcoFlow DELTA 3 Plus. We have not physically tested this unit. Use it to identify the checks needed for your load plan, not as a guarantee that it will run a particular appliance.

Editorial status: this is a neutral specification reference. EcoFlow is not a current approved affiliate partner of When Grid Fails, so this page does not contain a commission-earning EcoFlow purchase link.

Manufacturer specifications to compare

  • Rated battery energy: 1,024 Wh.
  • Battery chemistry: lithium iron phosphate (LFP).
  • US AC voltage: 120 V.
  • Rated AC output: 1,800 W.
  • Advertised surge output: 3,600 W; this profile does not establish the duration or an appliance-specific starting capability.

Sources: EcoFlow’s US product page and DELTA 3 Plus manual. These are manufacturer specifications, not our measurements.

What these numbers do—and do not—tell you

Our screening approach uses the rated AC output separately from battery energy. A load below the output rating still needs startup, outlet and operating-condition checks. An energy requirement below the rated Wh does not establish the energy available at the AC outlet.

We have not verified usable AC energy under a refrigerator load, conversion efficiency across its cycle, or surge duration for this profile. Consequently, we do not publish a refrigerator runtime or automatic compatibility verdict for this unit.

EcoFlow describes X-Boost separately from rated output and warns that voltage-sensitive devices may stop under low voltage. Do not substitute the X-Boost figure for the 1,800 W rated-output check. Its manual also warns about AC timeout with intermittent loads such as refrigerators; review that setting before relying on backup operation.

Before choosing this model

  1. Build your own device list in Backup Power Map.
  2. Obtain the refrigerator’s running and starting requirements and compare all loads that may overlap.
  3. Ask for usable-energy or runtime evidence under conditions relevant to your plan.
  4. Confirm the US unit, included accessories, current availability and purchase terms with the seller.

A useful purchase decision needs both an output check and an energy check. Passing only one leaves a gap; a bigger advertised number is not a substitute for the missing evidence.

Use this profile as a comparison reference

This page remains available to help readers compare published specifications. For products from currently approved partners, use our Products & Current Picks page after completing your load plan.

No commission-earning EcoFlow purchase link is provided on this page. Product specifications, stock and firmware can change; verify the current US model with the manufacturer.

Report a specification correction with the model, source and relevant conditions.